Variable Frequency Drive Inverter VFD NEW

2HP 1.5KW 7A 220-250V

(we also stock 380V version item, please contact us to buy)

(we also stock 2HP 1.5KW

                        3HP 2.2KW

                      4HP 3KW

                               4KW  

please buy from our store or contact us to buy.)

 

We guarantee all our item price+shipping cost is the lowest price on eBay. If you find the other seller is selling the exactly the same item at lower price than ours. Please tell us, we will beat him and sell this item at the lower price to you. We guaranteed all our item price+shipping cost is the lowest price on eBay. We are the lowest profit eBay seller.

 

New Upgraded With

Adopt Japan Mitsubish chip

Easy PLC function can realize 16 legs of speed and inverter control function;

RS485 communication port, adopting standard international MODBUS main circuit control;

With extremely strong anti-jamming capability

Low output ratting torque0.5HZ-150%, low speed running ability;

Carrier adjustable by 16KHZ, completely soundless working environment;

Broad voltage working area

Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;

Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;

With perfect error protection and short circuit starting protection capability;

PASS ISO9001 quality certification which means this item is the top quanlity item

 

Brand new sealed in factory CARTON

 

Retail Price: 499$

 

 

 

I Description

 

This VFD can be used for constant torque loads ( such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter. The inpute for this VFD is 1 or 3 phase as you like. You can control the different speed as you like when yo use this VFD. Many customer bought this VFD from us to use for: Lathes, Mills, Car Hoists, Pumps & Conveyors, etc and then performance excellently. This item use Sine wave PWN(SPWM ) for the control system and performace excellently.
 

 

II Technical Parameters

 

1) Inpute Voltage: 220±15% (We also stock 380±15%, please contact us for item stock)

2) Output Voltage – 208-240VAC (analogous to Input Voltage)

3) Inpute Frequency: 48-63 Hz

4) Outpute Frequency: 0-400 Hz

5) Inpute Phase: 1 or 3 phase as you like

6) Outpute Phase: 3 phase

7) Item Manufactuer: From a well-known manufacture who manufacture VFD for more than 12 years.

8) Warranty: 1 year

 

Series		HY inverters
Control Mode		SPWM
Input Power		220V class：220±15%(we also stock 380V item, please contact us for stock)
5-Digits Display & Status Indicator Lamp		Displaying frequency, current, revolution, voltage, counter, temperature, FOR or REV rotation, and fault, etc.
Communication Control		RS-485
Working Temperature		-10~40℃
Humidity		0-95% Relative Humidity（without dew）
Vibration		Below 0.5G
Frequency Control	Range	0.1~2500.0Hz
	Accuracy	Digital: 0.1%（-10~40℃）; Analog: 0.1% （25±10℃）
	Setting Resolution	Digital: 0.1Hz; Analog: 1‰ of max. Operating frequency
	Output Resolution	0.1Hz
	Operator Setting Method	Press directly ←∧∨ to set.
	Analog Setting Method	External Voltage 0-5V，0-10V，4-20mA，0-20mA.
	Other Functions	Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set.
General Control	Ramp Control	Selectable 4-speed steps ramp-up and -down time (0.1-6500s).
	V/F Curve	Set V/F curve at will.
	Torque Control	Torque increase settable by max. 10.0%. The starting torque can reach 150% at 1.0Hz.
	Multi-Inputs	6 multi-function input terminals for 8–speed steps control, program operation, switching of 4-speed Ramp, UP/DOWN function, counter, external emergency stop and other functions.
	Multi-Outputs	5 multi-output for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings.
	Other Functions	Auto Voltage Regulation（AVR）, Decelerating Stop or Coasting Stop, DC Braking, Auto Reset and Restart, Frequency Track, PLC Program Control, Traverse Control, Drawing Control、Auto Energy Saving, Carrier Adjustable (Up to 20KHz), etc.
Protection Functions	Overload Protection	Electronic relay protection motor drive Drive（for constant torque150%/1 min. for the kinds of fan 120%/1min.）
	FuseProtection	When the fuse breaks , the motor will stop.
	Over-voltage	220V class：DC Voltage ＞400V We also stock 380V item, contact us about stock 380V class：DC Voltage ＞800V
	Under-voltage	220V class：DC Voltage ＜200V We also stock 380V item, contact us about stock 380V class：DC Voltage ＜400V
	Restart After Instant Stop	Restart with Frequency Track afterInstant Stop
	Stall Protection	Stall protection in ramp operation
	Output Short Circuit	Electrical circuit protection
	Other Functions	Fin over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, etc.

 

 

 

 

III

Following, please see the item picture firstly, then bases on the picture, I will guid you how to install this VFD

Symbol	Function Description
R.S.T	Input terminal of AC line power.（220V class, for both single/three phase, single phase connected to any two phases）
U.V.W	Output terminal of the inverter
P+.PR	Connector for braking resistor.
E	Ground terminal: the third method of grounding for 220V and special grounding for 380 V of Electrical Engineering Regulations.

Item Connection Diagram