Updated NOVA NV-500B PROFESSIONAL MICRODERMABRASION MACHINE

Healthy -Beautify- Glowing - Energizing Skin-

A Feeling of Well-Being!!!!!

Retail Price:1899USD

Introduction

The Micro-crystal Dermabrasion was designed by Italian Florence's Mattioli at first, until now had over 20 years' history. This kind of technology only supplies to the dermatology expert and doctor at first uses, but more and more SPA House & Beauty Saloon also gradually uses, it was called the best method of medical beauty. This method successfully has developed in Europe for several years, cures patient thousands of examples, and has obtained the extremely satisfactory effect.

Now we want to introduce the Diamond Dermabrasion, it is a creative improvement of the Micro-crystal Dermabrasion. The Diamond Dermabrasion provided a non-surgical skin refinish procedure, by using sterile diamond heads to abrade or rub off the top skin layer, then Vacuuming out the particles along with any dirt and dead skin back up. This procedure removes skin debris, imperfections, blemishes, wrinkles and unwanted pigmentation on the skin. Moderate usage of Diamond Dermabrasion, accompany with skin products that penetrate through top skin layer that reach the dermis level, helps to replenish natural nutrients, restore cell activity, and promote skin health. The results after Micro Dermabrasion treatment is usually a healthy, glowing, beautiful skin.

Common Uses

• Removing pimples

• Skin firming

• Removing acne

• Lightening spots

• Preventing wrinkles

• Cuticle removing

• Excellent cleansing effect

• Extremely high absorption of nourishment

• Awesome ability to maintain clear and pure skin

• Many other uses

Results: Vibrant, healthy, beautify, glowing skin, diminished signs of aging or scarring.

Treatment Time: Less than 60 minutes per session (multiple sessions needed)

For Best Results: Have a minimum of six sessions, seven to ten days apart

Recovery: No Downtime

CE Certification, ISO9001 Quality Certification

How to use

1. Push in the movable ring of copper nozzle at the hand piece, and pull out the 6x4 size vacuum hose. Then push in the black plastic ring on the vacuum hose.

2. Put a drop of cream or milk lotion on the vacuum hose nozzle, push in the movable ring and insert in the vacuum hose to the limit.

3. Insert a cotton swab into the Diamond Head, then tight up the Diamond Head on the hand piece. Remove the cotton swab after every treatment.

4. Turn on the power switch.

5. Adjust the Vacuum intensity by Vacuum Regulator according to the following reference table, the intensity displays on Vacuum gauge and check with the client for comfort.

Recommended Vacuum intensity on treatment area

Treatment Schedule Table

6. Use the incline area of Hand piece to contact with the skin surface. Proceed with a slow sliding motion. Do not place the hand piece at one spot for too long, doing so will cause harm to the skin.

7. Adjust the crystal flow rate by the Vacuum Regulator slowly from minimum to maximum. For commonly use, do not set the flow rate to maximum unless it is of necessity. This is for better comfort intensity.

8. Gently stretch the skin with thumb and finger and glide the Hand-piece 2 to 3 times over the area being treated. Then cross again in different directions to prevent streaking lines as in the reference picture. Brush strokes or polishing motions may be used in different sites.

DIAGRAM OF SUGGESTED MOVEMENTS AND AREAS FOR DERMABRASION

Please follow direction of arrows.

Units in the package

• DERMABRASION HANDLES

• 9 PC DIAMOND TIP SET (3 LARGE: 1 Fine, 1 Medium, and 1 Coarse; 3 MEDIUM: 1 Fine, 1 Medium, and 1 Coarse; 3 SMALL: 1 Fine, 1 Medium, and 1 Coarse)

• INSTRUCTION MANUAL

• POWER CABLE

• VACUUM HOSE

• COTTON FILTERS

• HD FOAM LINED CARRY CASES FOR DIAMOND TIPS AND HANDLES

Overall dimensions are 13.5" H x 12" W x 15" D

Item Unit