Fluke 355 AC/DC TRMS 2000 A Clamp Meter

Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc
The large 58 mm (2.3 in) jaw capacity is suitable for large, or multiple conductors
CAT IV 600 V, CAT III 1000 V rating for added user protection
In-rush current measurement captures 'power-on' surge current with accuracy and repeatability
Accurately measure frequency up to 1 kHz for optimum troubleshooting
Quickly analyze readings using the MIN, MAX, and AVG functions
A large backlit display allows for easy visibility in low-lit areas
Use the display hold feature to capture readings even when the display cannot be viewed
Use the low-pass filter to smooth out noisy loads and stabilize readings

Fluke 355 Shown

Fluke Introduces a new line of Clamp meters which promise to surpass expectations, meaning the user can confidently take reliable readings with the true-rms. The Fluke 355 Clamp Meters; the tools of choice for high-current measurements up to 2000 A.

The Fluke 355 is designed with extra-wide jaw easily to clamp around large conductors typically found in high-current applications. The rugged design and CAT IV 600 V, CAT III 1000 V ratings, add an extra element of protection when taking high-powered measurements.

Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The Fluke 355's Sister Clamp meter, the Fluke 353, lacks the ability to measure voltage and resistance, however this makes it more affordable for those people who require a high quality product and do not require excess options. The functions of these two clamp meters easily makes the Fluke 353 and 355 the most versatile tool for utilities, electrical contractors, and industrial service technicians.

Fluke 355 Specifications
Electrical Specifications
Current Measurement DC and AC: 10 Hz to 100 Hz
Range				40A		400A			2000 A; 1400 ac rms
Resolution				10 mA		100 mA			1 A
Accuracy				1.5% rdg + 15 digits		1.5% rdg + 5 digits
Trigger Level for Inrush				0.50 A		5.0 A			5 A
Trigger Level for Hz			Filter Off	2.50 A		2.0 A			8 A
			Filter On	0.50 A		2.50 A			8 A
Voltage Measurement: 10 Hz to 100 Hz
Range				4 V	40 V		400 V			600 V AC RMS	1000 V DC
Resolution				1 mV	10 mV			100 mV			1V
Accuracy				1 % rdg + 10 digits	1 % rdg + 5 digits
Trigger Level for Hz	Filter Off/On			0.050 V	0.25 V			6 V			N/A
Voltage Measurement: 100.1 Hz to 1 kHz
Range				4 V	40 V			400 V			600 V AC RMS
Resolution				1 mV	10 mV			100 mV			1 V
Accuracy				3 % rdg + 10 digits	3 % rdg + 5 digits
Ohms Measurement
Range				400 Ω	4k Ω			40kΩ			400k Ω
Resolution				0.1 Ω	1 Ω			10 Ω			100Ω
Accuracy				1.5 % rdg + 5 digits
Crest Factor (50/60 Hz)
Range				40A		400A			2000 A; 1400 ac rms
Crest Factor (50/60 Hz)				2 @ 33 A		2 @ 330 A			2 @ 1000 A
				2.4 @ 27 A		2.4 @ 270 A			2.4 @ 833 A
				Add 2 % to error spec for CF > 2
Continuity Beeper
Range		On at:		≤ 30 Ω
		Off at:		≥ 100 Ω
Current Measurement AC: 100.1 Hz to 1 kHz
Range				40A		400A			2000 A; 1400 ac rms
Resolution				10 mA		100 mA			1 A
Accuracy ( A)				1.5% rdg + 15 digits		1.5% rdg + 5 digits
Trigger Level for Inrush				0.50 A		5.0 A			5 A
Trigger Level for Hz			Filter Off	2.50 A		2.0 A			8 A
			Filter On	0.50 A		2.50 A			8 A
Frequency measurement
Measurement Range				5.0 Hz to 1 kHz
Resolution				0.1 Hz (15 Hz to 399.9 Hz)
				1 Hz (400 Hz to 1 kHz)
Accuracy	5.0 Hz to 100 Hz			0.2 % + 2 counts
	100.1 Hz to 1 kHz			0.5 % + 5 counts
Trigger Level				Refer to current and voltage tables
Environmental Specifications
Operating Temperature				32 °F to + 122 °F (0 °C to +50 °C)
Operating Humidity				0 to 95 % (non-condensing)
Operating Altitude				2000m
IP Rating				42 (Indoor use Only)
Drop Test Requirements				1 m
EMI, RFI, EMC				FCC part 15, IEC/EN 61326-1:1997 class B
				IEC/EN 61326:1997 3V/m, performance criteria B, EN61325
Temperature co-Efficient	Current			0.1 % of reading per °C outside 22 °C to 24 °C
	Voltage			0.1 % of reading per °C outside 22 °C to 24 °C
General Specifications
Batteries:				6- 1.5 V AA NEDA 15 A or IEC LR6
Test Leads:				Rated to 1000 V
Jaw Size:				2.28 inches (58 mm)
Dimensions (L x W x D):				12 inches x 3.75 inches x 2 inches (300 mm x 98 mm x 52 mm)
Safety Rating:				IEC 61010-2-032, 600 V CAT IV,
				1000 V CAT III

Write a Review

Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.

After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).

Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

By Categories:

Industrial Instrument - Digital Multimeter

Newsletter
Stay Tuned!

Get updates on sales and discount offers.